Today I will analyze the difference between R406A and R407c.
At present, there are many types of refrigerants,Many refrigerant importers/Buyers and refrigerant wholesalers have relatively vague concepts about similar refrigerants, which leads to more problems in the process of purchase and use. In fact, even if the refrigerants are similar in type, there are some differences in the application process.
R406A refrigerant Gas is a mixture of HCFC-22, HCFC-142b and R-600a. It is a colorless gas at normal temperature. It is a colorless transparent liquid under its own pressure. It is a substitute for R500 and R12. It is environmentally friendly and energy-saving. The refrigeration volume and other aspects are better than R12 refrigerant , which can directly replace R12, but the power consumption will increase by 18%.
R407c is a mixed refrigerant that does not damage the ozone layer. Due to its close proximity to HCFC-22, it is used in the long-term replacement of HCFC-22 in refrigeration systems for a variety of air conditioning systems and non-centrifugal refrigeration systems.
R407c refrigerant is widely used in household air conditioners, small and medium commercial homes, passenger car air conditioners, train air conditioners, etc. The compressor draws in the lower pressure working fluid vapor from the evaporator, causes the pressure to rise, and then sends it to the condenser, which is condensed into a higher pressure liquid in the condenser, and is throttled after the throttling valve becomes a pressure. After the low liquid is sent to the evaporator, it absorbs heat in the evaporator and evaporates to become a lower pressure steam, which is then sent to the inlet of the compressor to complete the refrigeration cycle.R407c refrigerants